Anchor Principle

The Principle of the CINTEC anchor system is illustrated below. The stainless steel hollow section has been inserted into insitu materials in the drilled holes on either side of the cavity. The grout has been injected under pressure, inflating the sock throughout, but noticeably in the cavity and the hollow in the outer leaf. Milk grout has passed through the expanded sock mesh to provide a chemical and mechanical bond to the insitu materials.

Introduction | The Anchor Menu | Home | Grouting Equipment and Principles

CINTEC, CINTEC MC Systems, Presstec and Archtec are all Registered Trade Marks, Copyright ©1996-2002